HPE6-A84

Practice HPE6-A84 Exam

Is it difficult for you to decide to purchase HP HPE6-A84 exam dumps questions? CertQueen provides FREE online Aruba Certified Network Security Expert Written Exam HPE6-A84 exam questions below, and you can test your HPE6-A84 skills first, and then decide whether to buy the full version or not. We promise you get the following advantages after purchasing our HPE6-A84 exam dumps questions.
1.Free update in ONE year from the date of your purchase.
2.Full payment fee refund if you fail HPE6-A84 exam with the dumps

Full HPE6-A84 Exam Dump Here

Latest HPE6-A84 Exam Dumps Questions

The dumps for HPE6-A84 exam was last updated on May 08,2025 .

Viewing page 1 out of 2 pages.

Viewing questions 1 out of 12 questions

Question#1

Refer to the scenario.
A customer has an Aruba ClearPass cluster. The customer has AOS-CX switches that implement 802.1X authentication to ClearPass Policy Manager (CPPM).
Switches are using local port-access policies.
The customer wants to start tunneling wired clients that pass user authentication only to an Aruba gateway cluster. The gateway cluster should assign these clients to the “eth-internet" role. The gateway should also handle assigning clients to their VLAN, which is VLAN 20.
The plan for the enforcement policy and profiles is shown below:

The gateway cluster has two gateways with these IP addresses:
• Gateway 1
o VLAN 4085 (system IP) = 10.20.4.21
o VLAN 20 (users) = 10.20.20.1
o VLAN 4094 (WAN) = 198.51.100.14
• Gateway 2
o VLAN 4085 (system IP) = 10.20.4.22
o VLAN 20 (users) = 10.20.20.2
o VLAN 4094 (WAN) = 198.51.100.12
• VRRP on VLAN 20 = 10.20.20.254
The customer requires high availability for the tunnels between the switches and the gateway cluster. If one gateway falls, the other gateway should take over its tunnels. Also, the switch should be able to discover the gateway cluster regardless of whether one of the gateways is in the cluster.
Assume that you are using the “myzone” name for the UBT zone.
Which is a valid minimal configuration for the AOS-CX port-access roles?

A. port-access role eth-internet gateway-zone zone myzone gateway-role eth-user

B. port-access role internet-only gateway-zone zone myzone gateway-role eth-internet

C. port-access role eth-internet gateway-zone zone myzone gateway-role eth-internet vlan access 20

D. port-access role internet-only gateway-zone zone myzone gateway-role eth-internet vlan access 20

Question#2

Refer to the scenario.
This customer is enforcing 802.1X on AOS-CX switches to Aruba ClearPass Policy Manager (CPPM). The customer wants switches to download role settings from CPPM.
The “reception-domain” role must have these settings:
― Assigns clients to VLAN 14 on switch 1, VLAN 24 on switch 2, and so on.
― Filters client traffic as follows:
― Clients are permitted full access to 10.1.5.0/24 and the Internet
― Clients are denied access to 10.1.0.0/16
The switch topology is shown here:

How should you configure the VLAN setting for the reception role?

A. Assign a consistent name to VLAN 14, 24, or 34 on each access layer switch and reference that name in the enforcement profile VLAN settings.

B. Configure the enforcement profile as a downloadable role, but specify only the role name and leave the VLAN undefined. Then define a “reception” role with the correct VLAN setting on each individual access layer switch.

C. Assign a number-based ID to the access layer switches. Then use this variable in the enforcement profile VLAN settings: %(NAS-ID}4.

D. Create a separate enforcement profile with a different VLAN ID for each switch. Add all profiles to the profile list in the appropriate enforcement policy rule.

Question#3

A customer has an AOS 10 architecture, which includes Aruba APs. Admins have recently enabled WIDS at the high level.
They also enabled alerts and email notifications for several events, as shown in the exhibit.

Admins are complaining that they are getting so many emails that they have to ignore them, so they are going to turn off all notifications.
What is one step you could recommend trying first?

A. Send the email notifications directly to a specific folder, and only check the folder once a week.

B. Disable email notifications for Rogue AP, but leave the Infrastructure Attack Detected and Client Attack Detected notifications on.

C. Change the WIDS level to custom, and enable only the checks most likely to indicate real threats.

D. Disable just the Rogue AP and Client Attack Detected alerts, as they overlap with the Infrastructure Attack Detected alert.

Question#4

You need to install a certificate on a standalone Aruba Mobility Controller (MC). The MC will need to use the certificate for the Web UI and for implementing RadSec with Aruba ClearPass Policy Manager. You have been given a certificate with these settings:
Subject: CN=mc41.site94.example.com
No SANs -
Issuer: CN=ca41.example.com -
EKUs: Server Authentication, Client Authentication
What issue does this certificate have for the purposes for which the certificate is intended?
A. It has conflicting EKUs.
B. It is issued by a private CA.
C. It specifies domain info in the CN field instead of the DC field.
D. It lacks a DNS SAN.

A. D

Question#5

A customer has an AOS 10-based solution, including Aruba APs. The customer wants to use Cloud Auth to authenticate non-802.1X capable IoT devices.
What is a prerequisite for setting up the device role mappings?

A. Configuring a NetConductor-based fabric

B. Configuring Device Insight (client profile) tags in Central

C. Integrating Aruba ClearPass Policy Manager (CPPM) and Device Insight

D. Creating global role-to-role firewall policies in Central

Exam Code: HPE6-A84 Q & A: 60 Q&As Updated: May 08,2025

Full HPE6-A84 Exam Dumps Here

Exam Code: HPE6-A84
Q & A: 60 Q&As
Updated: May 08,2025

About HPE6-A84 Dumps