NCP-DB-6.10

Practice NCP-DB-6.10 Exam

Is it difficult for you to decide to purchase Nutanix NCP-DB-6.10 exam dumps questions? CertQueen provides FREE online Nutanix Certified Professional - Database Automation (NCP-DB) v6.10 NCP-DB-6.10 exam questions below, and you can test your NCP-DB-6.10 skills first, and then decide whether to buy the full version or not. We promise you get the following advantages after purchasing our NCP-DB-6.10 exam dumps questions.
1.Free update in ONE year from the date of your purchase.
2.Full payment fee refund if you fail NCP-DB-6.10 exam with the dumps

Full NCP-DB-6.10 Exam Dump Here

Latest NCP-DB-6.10 Exam Dumps Questions

The dumps for NCP-DB-6.10 exam was last updated on Jun 22,2025 .

Viewing page 1 out of 10 pages.

Viewing questions 1 out of 51 questions

Question#1

Which action must an administrator take in Era Networks before using Era to provision a MSSQL AG cluster?

A. A network in each data center must be configured for Era.

B. A private network must be configured in Era for the heartbeat traffic.

C. A that has a static pool managed by Era must be configured.

D. A network that has a DHCP pool must be configured in Era.

Explanation:
According to the Nutanix Database Automation (NCP-DB) learning documents, before using Era to provision a MSSQL AG cluster, an administrator must configure a private network in Era for the heartbeat traffic1. This is because the heartbeat traffic is crucial for maintaining the health and status of the MSSQL AG cluster. The heartbeat traffic is used by the nodes in the cluster to communicate with each other and check the status of the other nodes. If a node does not receive a heartbeat from another node within a certain time frame, it assumes that the other node has failed and takes appropriate action234.

Question#2

Refer to the exhibit.

An administrator has opened the Enable Multi-Cluster configuration for an NDB instance, but the wizard does not present the VLAN, as shown in the exhibit.
Which configuration allows to choose a VLAN in the drop-down box?

A. A network profile must be created first.

B. Verify if subnet leverages advanced network control.

C. IP address pool must be managed in ND

D. VLAN subnet must use IP address management.

Explanation:
The provided exhibit shows the "Enable Multi-Cluster" configuration wizard in NDB, where the VLAN dropdown is empty with a "Nothing found" message, indicating that no VLANs are available for selection. This issue arises because NDB requires a network profile to be created before provisioning the NDB Agent VM and enabling multi-cluster support. A network profile defines the static VLANs managed by NDB, which are essential for network configuration during multi-cluster setup. The warning in the exhibit ("An NDB managed static vLAN is required to provision the NDB Agent VM. Add an NDB managed static vLAN using the Networks page to continue.") reinforces that the administrator must create a network profile via the Networks page to populate the VLAN dropdown.
Option A (A network profile must be created first) is correct as it addresses the root cause by ensuring VLANs are defined in a network profile.
Option B (Verify if subnet leverages advanced network control) is incorrect because advanced network control is not a prerequisite for VLAN selection in this context.
Option C (IP address pool must be managed in NDB) is incorrect because IP address pools are managed separately and not required for VLAN selection at this stage.
Option D (VLAN subnet must use IP address management) is incorrect because IP address management is not a direct requirement for enabling VLAN selection in the wizard.
After creating the network profile, the administrator can proceed with the multi-cluster enablement.
Reference: Nutanix Database Service (NDB) User Guide, Chapter 3: Configuring an NDB Environment, Section:
Configuring Network Profiles for Multi-Cluster
Nutanix Support & Insights, Knowledge Base Article: "Troubleshooting VLAN Issues in NDB Multi-Cluster Setup"
Nutanix Certified Professional - Database Automation (NCP-DB) v6.5 Blueprint, Section 3: Configure an NDB Environment

Question#3

Which policies define Time Machine data availability across multiple registered clusters in NDB?

A. Recovery Plans

B. Data Access Management

C. Data Protection

D. Service Level Agreements

Explanation:
The recovery plans policy defines the Time Machine data availability across multiple registered clusters in NDB. The recovery plans policy allows the database administrator to specify the source and target clusters, the frequency and retention of the cross-cluster snapshots, and the network and compute profiles for the recovery operations. The recovery plans policy helps to ensure the disaster recovery and business continuity of the NDB-managed databases in case of a cluster failure or outage.
The data access management policy defines the access permissions and roles for the NDB users and groups. The data access management policy allows the database administrator to grant or revoke access to the NDB instance, the database server VMs, the databases, and the database operations. The data access management policy helps to ensure the security and compliance of the NDB-managed databases and users.
The data protection policy defines the backup and restore settings for the NDB-managed databases. The data protection policy allows the database administrator to specify the frequency, retention, and compression of the database snapshots, and the backup location and encryption for the database backups. The data protection policy helps to ensure the backup and recovery of the NDB-managed databases within the same cluster.
The service level agreements policy defines the performance and availability metrics for the NDB-managed databases. The service level agreements policy allows the database administrator to monitor and enforce the database uptime, latency, throughput, and IOPS. The service level
agreements policy helps to ensure the quality of service and performance of the NDB-managed
databases.
Reference:
Nutanix Database Management & Automation Training Course, Module 4: Nutanix Era Configuration, Lesson 4.1: Nutanix Era Configuration, slide 9.
Nutanix Database Management & Automation Training Course, Module 5: Nutanix Era Operations, Lesson 5.1: Nutanix Era Operations, slides 8, 12, 16, 20.
Nutanix Database Management & Automation Training Course, Module 6: Nutanix Era Disaster Recovery, Lesson 6.1: Nutanix Era Disaster Recovery, slides 5-7.

Question#4

Which NDB HA control plane VM is upgraded first during an NDB upgrade?

A. NDB Server

B. Leader NDB API Server

C. Leader HAProxy

D. NDB Agent VMs

Explanation:
During an NDB upgrade, the upgrade process follows a specific order to maintain stability and HA. The Leader NDB API Server is upgraded first. This server coordinates API requests and ensures the control plane remains operational. Upgrading the leader first minimizes disruption, as subsequent components (e.g., other API servers, HAProxy) rely on its leadership role. Once the leader is upgraded, the remaining NDB HA control plane VMs (e.g., follower API servers, HAProxy) are updated in sequence.
Other options are incorrect:
A. NDB Server: Refers to the main NDB instance, not upgraded first.
C. Leader HAProxy: Upgraded after API servers to maintain load balancing.
D. NDB Agent VMs: Upgraded last, as they are client-side components.
Thus, the verified answer is B, reflecting the upgrade sequence.
Official Nutanix Database Automation
Reference: Nutanix Database Management & Automation (NDMA) course, Module 2: Deploying and Configuring
an NDB Solution, Lesson 2.4: Updating NDB.
Nutanix Certified Professional - Database Automation (NCP-DB) v6.5 Knowledge Objectives, Section 2: Deploy and Configure an NDB Solution, Objective 2.3: Perform NDB Updates (applicable to v6.10). Nutanix NDB Administration Guide: "NDB Upgrade Process" section.

Question#5

An administrator needs to make new VLANs available when provisioning a Oracle cluster database, which have been added to NDB via the Administration menu.
What needs to be done to expose the new VLANs for provisioning?

A. Create a new VLAN in Prism Element and discover it in ND

B. Update the Network Profile to include the new VLANs.

C. Update Prism Element with the new VLAN and discover it in ND

D. Create a new Network Profile with the new VLANs.

Explanation:
A Network Profile is a collection of network settings that are used to provision database server VMs in NDB. A Network Profile can include one or more VLANs, IP ranges, and DNS servers. To make new VLANs available when provisioning an Oracle cluster database, you need to update the Network Profile to include the new VLANs. You can do this by editing the existing Network Profile or creating a new one with the new VLANs. You do not need to create or update the VLANs in Prism Element, as NDB can discover the VLANs configured in AHV1.
Reference:
Nutanix Database Management & Automation (NDMA) course, Module 2, Lesson 2.4 - Network Profiles
Nutanix Support & Insights, Nutanix NDB User Guide v2.5, Network Profiles
Nutanix Certified Professional - Database Automation (NCP-DB), Section 2 - Deploy and Configure an NDB Solution

Exam Code: NCP-DB-6.10 Q & A: 251 Q&As Updated: Jun 22,2025

Full NCP-DB-6.10 Exam Dumps Here

Exam Code: NCP-DB-6.10
Q & A: 251 Q&As
Updated: Jun 22,2025

About NCP-DB-6.10 Dumps